BEC Audio dmc1 Manual de usuario descargar pdf (Pagina 4)

BEC Audio

1325 Millersport Hwy (Suite 203) Williamsville, NY 14221

Toll Free 888-556-3998 / Main Office #716-689-0871

· Check that master is on a dedicated 120 Volt 15 amp circuit breaker.

· Possible defective transformer (TE5).

· Possible defective master.

If there is no communication to the door:

· Make sure to perform “DOOR TALK” correctly. (press “Listen” and “Talk”

simultaneously to talk to the door. Release to listen to the door).

· Check that door speaker is connected properly at master unit and door

station.

· Check for short or open on door station cable.

· Check that master is not in “off” position

· Check that intercom and master volume levels are set properly.

· Possible defective door station.

· Possible defective master.

If there is no chime, or continuous chime:

· Check that the chime module (MC3 or MC8) is connected correctly to the

master unit.

· Check that the bell button wires are connected to screws on back of bell

button. (Bell button should be lit if connected properly to the chime module.)

· Check that room switches at master are in “RADIO INT” or “INTERCOM”

position. (No chime when stations are switched to the “Monitor” or “Off”

position.)

· Check that “INTERCOM VOLUME” and room station volume controls are

adjusted properly. (See AUDIO SETTINGS.)

· Check for short or open on bell button wires. (Short will cause Error 9).

· Possible defective chime module.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

BEC Audio dmc1 Manual de usuario Pagina 4